Welcome to Hefei Gere-tech International Co, Ltd.
Precautions for operation of 40*60CM heat transfer machine
2021-09-15
1. Pressure: If the pressure is not enough or too high, you can adjust the pressure adjustment knob behind the 40*60CM heat transfer machine to increase the pressure in the clockwise direction; otherwise, decrease the pressure;
2. Time: When the hot stamping time arrives and the buzzer does not sound or keeps ringing, if it is uncomfortable, it must be adjusted to an appropriate position;
3. Temperature: When the adjusted temperature is reached, the pointer of the thermostat points to the position of "180°C" (reached in about 5 minutes). If the thermometer starts to rise but the heating plate does not heat up, please check the circuit;
4. When the handle is pressed down to the end, the hand is released and the handle automatically rises, please adjust the adjustment knob downward;
5. When the 40*60CM heat transfer machine is hot-stamped and it feels difficult to lift the handle up, you can adjust the adjustment knob downward.
undefined
CONTACT NUMBER
E-mail : admin@first-cutterplotters.com; info@gere-tech.com
Wechat: G13955145777
Room 1302, Comprehensive Building, Wangcheng Building, No. 140, Guanting Road, Shushan District, Hefei City
copyright © 2022 Hefei Gere-tech International Co, Ltd.
Powered by：www.300.cn SEO
